dotemacs

orgcard.tex (24071B)

---

 % Reference Card for Org Mode
 \input org-version.tex
 
 %**start of header
 \newcount\columnsperpage
 \newcount\letterpaper
 
 % This file can be printed with 1, 2, or 3 columns per page (see below).
 % Specify how many you want here.
 \columnsperpage=3
 
 % PDF output layout.  0 for A4, 1 for letter (US), a `l' is added for
 % a landscape layout.
 \input pdflayout.sty
 \pdflayout=(0l)
 
 % Nothing else needs to be changed below this line.
 % Copyright (C) 1987, 1993, 1996--1997, 2001--2023 Free Software
 % Foundation, Inc.
 
 % This document is free software: you can redistribute it and/or modify
 % it under the terms of the GNU General Public License as published by
 % the Free Software Foundation, either version 3 of the License, or
 % (at your option) any later version.
 
 % As a special additional permission, you may distribute reference cards
 % printed, or formatted for printing, with the notice "Released under
 % the terms of the GNU General Public License version 3 or later"
 % instead of the usual distributed-under-the-GNU-GPL notice, and without
 % a copy of the GPL itself.
 
 % This document is distributed in the hope that it will be useful,
 % but WITHOUT ANY WARRANTY; without even the implied warranty of
 % MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 % GNU General Public License for more details.
 
 % You should have received a copy of the GNU General Public License
 % along with GNU Emacs.  If not, see <https://www.gnu.org/licenses/>.
 
 % This file is intended to be processed by plain TeX (TeX82).
 %
 % The final reference card has six columns, three on each side.
 % This file can be used to produce it in any of three ways:
 % 1 column per page
 %    produces six separate pages, each of which needs to be reduced to 80%.
 %    This gives the best resolution.
 % 2 columns per page
 %    produces three already-reduced pages.
 %    You will still need to cut and paste.
 % 3 columns per page
 %    produces two pages which must be printed sideways to make a
 %    ready-to-use 8.5 x 11 inch reference card.
 %    For this you need a dvi device driver that can print sideways.
 % Which mode to use is controlled by setting \columnsperpage above.
 %
 % To compile and print this document:
 % tex refcard.tex
 % dvips -t landscape refcard.dvi
 %
 % Author:
 %  Stephen Gildea <stepheng+emacs@gildea.com>
 %
 % Thanks to Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik
 % for their many good ideas.
 
 \def\shortcopyrightnotice{\vskip 1ex plus 2 fill
   \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
   Permissions on back.  v\orgversionnumber}}
 
 \def\copyrightnotice{
 \vskip 1ex plus 100 fill\begingroup\small
 \centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.}
 \centerline{v\orgversionnumber{} for Org-Mode \orgversionnumber{}, \versionyear}
 \centerline{Author: Philip Rooke}
 \centerline{based on refcard design and format by Stephen Gildea}
 
 \centerline{Released under the terms of the GNU General Public License}
 \centerline{version 3 or later.}
 
 \endgroup}
 
 % make \bye not \outer so that the \def\bye in the \else clause below
 % can be scanned without complaint.
 \def\bye{\par\vfill\supereject\end}
 
 \newdimen\intercolumnskip	%horizontal space between columns
 \newbox\columna			%boxes to hold columns already built
 \newbox\columnb
 
 \def\ncolumns{\the\columnsperpage}
 
 \message{[\ncolumns\space
   column\if 1\ncolumns\else s\fi\space per page]}
 
 \def\scaledmag#1{ scaled \magstep #1}
 
 % This multi-way format was designed by Stephen Gildea October 1986.
 % Note that the 1-column format is fontfamily-independent.
 \if 1\ncolumns			%one-column format uses normal size
   \hsize 4in
   \vsize 10in
   \voffset -.7in
   \font\titlefont=\fontname\tenbf \scaledmag3
   \font\headingfont=\fontname\tenbf \scaledmag2
   \font\smallfont=\fontname\sevenrm
   \font\smallsy=\fontname\sevensy
 
   \footline{\hss\folio}
   \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
 \else				%2 or 3 columns uses prereduced size
   \if 1\the\letterpaper
      \hsize 3.2in
      \vsize 7.95in
      \hoffset -.75in
      \voffset -.745in
   \else
      \hsize 3.2in
      \vsize 7.65in
      \hoffset -.25in
      \voffset -.745in
   \fi
   \font\titlefont=cmbx10 \scaledmag2
   \font\headingfont=cmbx10 \scaledmag1
   \font\smallfont=cmr6
   \font\smallsy=cmsy6
   \font\eightrm=cmr8
   \font\eightbf=cmbx8
   \font\eightit=cmti8
   \font\eighttt=cmtt8
   \font\eightmi=cmmi8
   \font\eightsy=cmsy8
   \textfont0=\eightrm
   \textfont1=\eightmi
   \textfont2=\eightsy
   \def\rm{\eightrm}
   \def\bf{\eightbf}
   \def\it{\eightit}
   \def\tt{\eighttt}
   \if 1\the\letterpaper
      \normalbaselineskip=.8\normalbaselineskip
   \else
      \normalbaselineskip=.7\normalbaselineskip
   \fi
   \normallineskip=.8\normallineskip
   \normallineskiplimit=.8\normallineskiplimit
   \normalbaselines\rm		%make definitions take effect
 
   \if 2\ncolumns
     \let\maxcolumn=b
     \footline{\hss\rm\folio\hss}
     \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
   \else \if 3\ncolumns
     \let\maxcolumn=c
     \nopagenumbers
   \else
     \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
     \errmessage{Illegal number of columns per page}
   \fi\fi
 
   \intercolumnskip=.46in
   \def\abc{a}
   \output={%			%see The TeXbook page 257
       % This next line is useful when designing the layout.
       %\immediate\write16{Column \folio\abc\space starts with \firstmark}
       \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
       \else\if a\abc
 	\global\setbox\columna\columnbox \global\def\abc{b}
         %% in case we never use \columnb (two-column mode)
         \global\setbox\columnb\hbox to -\intercolumnskip{}
       \else
 	\global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
   \def\multicolumnformat{\shipout\vbox{\makeheadline
       \hbox{\box\columna\hskip\intercolumnskip
         \box\columnb\hskip\intercolumnskip\columnbox}
       \makefootline}\advancepageno}
   \def\columnbox{\leftline{\pagebody}}
 
   \def\bye{\par\vfill\supereject
     \if a\abc \else\null\vfill\eject\fi
     \if a\abc \else\null\vfill\eject\fi
     \end}
 \fi
 
 % we won't be using math mode much, so redefine some of the characters
 % we might want to talk about
 %\catcode`\^=12
 \catcode`\_=12
 
 % we also need the tilde, for file names.
 \catcode`\~=12
 
 \chardef\\=`\\
 \chardef\{=`\{
 \chardef\}=`\}
 
 \hyphenation{mini-buf-fer}
 
 \parindent 0pt
 \parskip 1ex plus .5ex minus .5ex
 
 \def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
 
 % newcolumn - force a new column.  Use sparingly, probably only for
 % the first column of a page, which should have a title anyway.
 \outer\def\newcolumn{\vfill\eject}
 
 % title - page title.  Argument is title text.
 \outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}
 
 % section - new major section.  Argument is section name.
 \outer\def\section#1{\par\filbreak
   \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
   \vskip 2ex plus 1ex minus 1.5ex}
 
 \newdimen\keyindent
 
 % beginindentedkeys...endindentedkeys - key definitions will be
 % indented, but running text, typically used as headings to group
 % definitions, will not.
 \def\beginindentedkeys{\keyindent=1em}
 \def\endindentedkeys{\keyindent=0em}
 \endindentedkeys
 
 % paralign - begin paragraph containing an alignment.
 % If an \halign is entered while in vertical mode, a parskip is never
 % inserted.  Using \paralign instead of \halign solves this problem.
 \def\paralign{\vskip\parskip\halign}
 
 % \<...> - surrounds a variable name in a code example
 \def\<#1>{{\it #1\/}}
 
 % kbd - argument is characters typed literally.  Like the Texinfo command.
 \def\kbd#1{{\tt#1}\null}	%\null so not an abbrev even if period follows
 
 % beginexample...endexample - surrounds literal text, such a code example.
 % typeset in a typewriter font with line breaks preserved
 \def\beginexample{\par\leavevmode\begingroup
   \obeylines\obeyspaces\parskip0pt\tt}
 {\obeyspaces\global\let =\ }
 \def\endexample{\endgroup}
 
 % key - definition of a key.
 % \key{description of key}{key-name}
 % prints the description left-justified, and the key-name in a \kbd
 % form near the right margin.
 \def\key#1#2{\leavevmode\hbox to \hsize{\vtop
   {\hsize=.75\hsize\rightskip=1em
   \hskip\keyindent\relax#1}\kbd{#2}\hfil}}
 
 \newbox\metaxbox
 \setbox\metaxbox\hbox{\kbd{M-x }}
 \newdimen\metaxwidth
 \metaxwidth=\wd\metaxbox
 
 % metax - definition of a M-x command.
 % \metax{description of command}{M-x command-name}
 % Tries to justify the beginning of the command name at the same place
 % as \key starts the key name.  (The "M-x " sticks out to the left.)
 \def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
   {\hskip\keyindent\relax#1\hfil}%
   \hskip -\metaxwidth minus 1fil
   \kbd{#2}\hfil}}
 
 % threecol - like "key" but with two key names.
 % for example, one for doing the action backward, and one for forward.
 \def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\hfil\quad
   &\kbd{#3}\hfil\quad\cr}
 
 %\def\noteone{{\small \hfill [1]}}
 %\def\notetwo{{\small \hfill [2]}}
 \def\noteone{{\small [1]}}
 \def\notetwo{{\small [2]}}
 
 
 %**end of header
 
 
 \title{Org-Mode Reference Card (1/2)}
 
 \centerline{(for version \orgversionnumber)}
 
 \section{Getting Started}
 \metax{To read the on-line documentation try}{M-x org-info}
 
 \section{Visibility Cycling}
 
 \key{rotate current subtree between states}{TAB}
 \key{rotate entire buffer between states}{S-TAB}
 \key{restore property-dependent startup visibility}{C-u C-u TAB}
 \metax{show the whole file, including drawers}{C-u C-u C-u TAB}
 \key{reveal context around point}{C-c C-r}
 \metax{toggle indented view}{M-x org-indent-mode}
 
 \section{Motion}
 
 \key{next/previous heading}{C-c C-n/p}
 \key{next/previous heading, same level}{C-c C-f/b}
 \key{backward to higher level heading}{C-c C-u}
 \key{jump to another place in document}{C-c C-j}
 \key{previous/next plain list item}{S-UP/DOWN\notetwo}
 
 \section{Structure Editing}
 
 \key{insert new heading/item at current level}{M-RET}
 \key{insert new heading after subtree}{C-RET}
 \key{insert new TODO entry/checkbox item}{M-S-RET}
 \key{insert TODO entry/ckbx after subtree}{C-S-RET}
 \key{turn (head)line into item, cycle item type}{C-c -}
 \key{turn item/line into headline}{C-c *}
 \key{promote/demote heading}{M-LEFT/RIGHT}
 \metax{promote/demote current subtree}{M-S-LEFT/RIGHT}
 \metax{move subtree/list item up/down}{M-UP/DOWN}
 \metax{move the line at point up/down}{M-S-UP/DOWN}
 \metax{sort subtree/region/plain-list}{C-c \^{}}
 \metax{clone a subtree}{C-c C-x c}
 \metax{copy visible parts of the region}{C-c C-x v}
 \metax{kill/copy subtree}{C-c C-x C-w/M-w}
 \metax{yank subtree}{C-c C-x C-y or C-y}
 \metax{narrow buffer to subtree / widen}{C-x n s/w}
 
 \section{Capture - Refile - Archiving}
 \key{capture a new item (C-u C-u = goto last)}{C-c c \noteone}
 \key{refile subtree (C-u C-u = goto last)}{C-c C-w}
 \key{archive subtree using the default command}{C-c C-x C-a}
 \key{move subtree to archive file}{C-c C-x C-s}
 \key{toggle ARCHIVE tag / to ARCHIVE sibling}{C-c C-x a/A}
 \key{force cycling of an ARCHIVEd tree}{C-TAB}
 
 \section{Filtering and Sparse Trees}
 
 \key{construct a sparse tree by various criteria}{C-c /}
 \key{view TODO's in sparse tree}{C-c / t/T}
 \key{global TODO list in agenda mode}{C-c a t \noteone}
 
 \section{Tables}
 
 {\bf Creating a table}
 
 %\metax{insert a new Org-mode table}{M-x org-table-create}
 \metax{just start typing, e.g.}{|Name|Phone|Age RET |- TAB}
 \key{convert region to table}{C-c |}
 \key{... separator at least 3 spaces}{C-3 C-c |}
 
 {\bf Commands available inside tables}
 
 The following commands work when the cursor is {\it inside a table}.
 Outside of tables, the same keys may have other functionality.
 
 {\bf Re-aligning and field motion}
 
 \key{re-align the table without moving the cursor}{C-c C-c}
 \key{re-align the table, move to next field}{TAB}
 \key{move to previous field}{S-TAB}
 \key{re-align the table, move to next row}{RET}
 \key{move to beginning/end of field}{M-a/e}
 
 {\bf Row and column editing}
 
 \key{move the current column left}{M-LEFT/RIGHT}
 \key{kill the current column}{M-S-LEFT}
 \key{insert new column to left of cursor position}{M-S-RIGHT}
 
 \key{move the current row up/down}{M-UP/DOWN}
 \key{kill the current row or horizontal line}{M-S-UP}
 \key{insert new row above the current row}{M-S-DOWN}
 \key{insert hline below (\kbd{C-u} : above) current row}{C-c -}
 \key{insert hline and move to line below it}{C-c RET}
 \key{sort lines in region}{C-c \^{}}
 
 {\bf Regions}
 
 \metax{cut/copy/paste rectangular region}{C-c C-x C-w/M-w/C-y}
 %\key{copy rectangular region}{C-c C-x M-w}
 %\key{paste rectangular region}{C-c C-x C-y}
 
 {\bf Miscellaneous}
 
 \key{to limit column width to \kbd{N} characters, use}{...| <N> |...}
 \key{edit the current field in a separate window}{C-c `}
 \key{make current field fully visible}{C-u TAB}
 \metax{export as tab-separated file}{M-x org-table-export}
 \metax{import tab-separated file}{M-x org-table-import}
 \key{sum numbers in current column/rectangle}{C-c +}
 
 {\bf Tables created with the \kbd{table.el} package}
 
 \key{insert a new \kbd{table.el} table}{C-c ~}
 \key{recognize existing table.el table}{C-c C-c}
 \key{convert table (Org-mode $\leftrightarrow$ table.el)}{C-c ~}
 
 {\bf Spreadsheet}
 
 Formulas typed in field are executed by \kbd{TAB},
 \kbd{RET} and \kbd{C-c C-c}.  \kbd{=} introduces a column
 formula, \kbd{:=} a field formula.
 
 \key{Example: Add Col1 and Col2}{|=\$1+\$2      |}
 \key{... with printf format specification}{|=\$1+\$2;\%.2f|}
 \key{... with constants from constants.el}{|=\$1/\$c/\$cm |}
 \metax{sum from 2nd to 3rd hline}{|:=vsum(@II..@III)|}
 \key{apply current column formula}{| = |}
 
 \key{set and eval column formula}{C-c =}
 \key{set and eval field formula}{C-u C-c =}
 \key{re-apply all stored equations to current line}{C-c *}
 \key{re-apply all stored equations to entire table}{C-u C-c *}
 \key{iterate table to stability}{C-u C-u C-c *}
 \key{rotate calculation mark through \# * ! \^ \_ \$}{C-\#}
 \key{show line, column, formula reference}{C-c ?}
 \key{toggle grid / debugger}{C-c \}/\{}
 
 \newcolumn
 {\it Formula Editor}
 
 \key{edit formulas in separate buffer}{C-c '}
 \key{exit and install new formulas}{C-c C-c}
 \key{exit, install, and apply new formulas}{C-u C-c C-c}
 \key{abort}{C-c C-q}
 \key{toggle reference style}{C-c C-r}
 \key{pretty-print Lisp formula}{TAB}
 \key{complete Lisp symbol}{M-TAB}
 \key{shift reference point}{S-cursor}
 \key{shift test line for column references}{M-up/down}
 \key{scroll the window showing the table}{M-S-up/down}
 \key{toggle table coordinate grid}{C-c \}}
 
 \section{Links}
 
 \key{globally store link to the current location}{C-c l \noteone}
 \key{insert a link (TAB completes stored links)}{C-c C-l}
 \key{insert file link with file name completion}{C-u C-c C-l}
 \key{edit (also hidden part of) link at point}{C-c C-l}
 
 \key{open file links in emacs}{C-c C-o}
 \key{...force open in emacs/other window}{C-u C-c C-o}
 \key{open link at point}{mouse-1/2}
 \key{...force open in emacs/other window}{mouse-3}
 \key{record a position in mark ring}{C-c \%}
 \key{jump back to last followed link(s)}{C-c \&}
 \key{find next link}{C-c C-x C-n}
 \key{find previous link}{C-c C-x C-p}
 \key{edit code snippet of file at point}{C-c '}
 \key{toggle inline display of linked images}{C-c C-x C-v}
 
 \section{Working with Code (Babel)}
 
 \key{execute code block at point}{C-c C-c}
 \key{open results of code block at point}{C-c C-o}
 \key{check code block at point for errors}{C-c C-v c}
 \key{insert a header argument with completion}{C-c C-v j}
 \key{view expanded body of code block at point}{C-c C-v v}
 \key{view information about code block at point}{C-c C-v I}
 \key{go to named code block}{C-c C-v g}
 \key{go to named result}{C-c C-v r}
 \key{go to the head of the current code block}{C-c C-v u}
 \key{go to the next code block}{C-c C-v n}
 \key{go to the previous code block}{C-c C-v p}
 \key{demarcate a code block}{C-c C-v d}
 \key{execute next key sequence in code edit buffer}{C-c C-v x}
 \key{execute all code blocks in current buffer}{C-c C-v b}
 \key{execute all code blocks in current subtree}{C-c C-v s}
 \key{tangle code blocks in current file}{C-c C-v t}
 \key{tangle code blocks in supplied file}{C-c C-v f}
 \key{ingest all code blocks in supplied file into the Library of Babel}{C-c C-v i}
 \key{switch to the session of the current code block}{C-c C-v z}
 \key{load the current code block into a session}{C-c C-v l}
 \key{view sha1 hash of the current code block}{C-c C-v a}
 
 \section{Completion and Template Insertion}
 
 In-buffer completion completes TODO keywords at headline start, TeX
 macros after ``{\tt \\}'', option keywords after ``{\tt \#-}'', TAGS
 after  ``{\tt :}'', and dictionary words elsewhere.
 
 \key{complete word at point}{M-TAB}
 \key{structure template (insert or wrap region)}{C-c C-,}
 
 
 \newcolumn
 \title{Org-Mode Reference Card (2/2)}
 
 \centerline{(for version \orgversionnumber)}
 
 \section{TODO Items and Checkboxes}
 
 \key{rotate the state of the current item}{C-c C-t}
 \metax{select next/previous state}{\quad\quad S-LEFT/RIGHT}
 \metax{select next/previous set}{\quad\quad\quad C-S-LEFT/RIGHT}
 \key{toggle ORDERED property}{C-c C-x o}
 
 \key{view TODO items in a sparse tree}{C-c / t}
 \key{view 3rd TODO keyword's sparse tree}{C-3 C-c / t}
 \key{set the priority of the current item}{C-c , [ABC]}
 \key{remove priority cookie from current item}{C-c , SPC}
 \key{raise/lower priority of current item}{S-UP/DOWN\notetwo}
 
 \key{insert new checkbox item in plain list}{M-S-RET}
 \key{toggle checkbox(es) in region/entry/at point}{C-c C-x C-b}
 \key{toggle checkbox at point}{C-c C-c}
 %\metax{checkbox statistics cookies: insert {\tt [/]} or {\tt [\%]}}{}
 \key{update checkbox statistics (\kbd{C-u} : whole file)}{C-c \#}
 
 \section{Tags}
 
 \key{set tags for current heading}{C-c C-q}
 \key{realign tags in all headings}{C-u C-c C-q}
 \key{create sparse tree with matching tags}{C-c \\}
 \key{globally (agenda) match tags at cursor}{C-c C-o}
 
 \section{Properties and Column View}
 
 \key{set property/effort}{C-c C-x p/e}
 \key{special commands in property lines}{C-c C-c}
 \key{next/previous allowed value}{S-LEFT/RIGHT}
 \key{turn on column view}{C-c C-x C-c}
 \key{capture columns view in dynamic block}{C-c C-x x}
 
 \key{quit column view}{q}
 \key{show full value}{v}
 \key{edit value}{e}
 \metax{next/previous allowed value}{n/p or S-LEFT/RIGHT}
 \key{edit allowed values list}{a}
 \key{make column wider/narrower}{> / <}
 \key{move column left/right}{M-LEFT/RIGHT}
 \key{add new column}{M-S-RIGHT}
 \key{Delete current column}{M-S-LEFT}
 
 
 \section{Timestamps}
 
 \key{prompt for date and insert timestamp}{C-c .}
 \key{like \kbd{C-c .} but insert date and time format}{C-u C-c .}
 \key{like \kbd{C-c .} but make stamp inactive}{C-c !} % FIXME
 \key{insert DEADLINE timestamp}{C-c C-d}
 \key{insert SCHEDULED timestamp}{C-c C-s}
 \key{create sparse tree with all deadlines due}{C-c / d}
 \key{the time between 2 dates in a time range}{C-c C-y}
 \metax{change timestamp at cursor $\pm 1$ day}{\quad\quad\quad\quad S-RIGHT/LEFT \notetwo}
 \key{change year/month/day at cursor by $\pm 1$}{S-UP/DOWN \notetwo}
 \key{access the calendar for the current date}{C-c >}
 \key{insert timestamp matching date in calendar}{C-c <}
 \key{access agenda for current date}{C-c C-o}
 \key{select date while prompted}{mouse-1/RET}
 %\key{... select date in calendar}{mouse-1/RET}
 %\key{... scroll calendar back/forward one month}{< / >}
 %\key{... forward/backward one day}{S-LEFT/RIGHT}
 %\key{... forward/backward one week}{S-UP/DOWN}
 %\key{... forward/backward one month}{M-S-LEFT/RIGHT}
 \key{toggle custom format display for dates/times}{C-c C-x C-t}
 
 \newcolumn
 
 {\bf Clocking time}
 
 \key{start clock on current item}{C-c C-x C-i}
 \key{stop/cancel clock on current item}{C-c C-x C-o/x}
 \key{display total subtree times}{C-c C-x C-d}
 \key{remove displayed times}{C-c C-c}
 \key{insert/update table with clock report}{C-c C-x C-x}
 
 \section{Agenda Views}
 
 \key{add/move current file to front of agenda}{C-c [}
 \key{remove current file from your agenda}{C-c ]}
 \key{cycle through agenda file list}{C-'}
 \key{set/remove restriction lock}{C-c C-x </>}
 
 \key{compile agenda for the current week}{C-c a a \noteone}
 \key{compile global TODO list}{C-c a t \noteone}
 \key{compile TODO list for specific keyword}{C-c a T \noteone}
 \key{match tags, TODO kwds, properties}{C-c a m \noteone}
 \key{match only in TODO entries}{C-c a M \noteone}
 \key{find stuck projects}{C-c a \# \noteone}
 \key{configure custom commands}{C-c a C \noteone}
 %\key{configure stuck projects}{C-c a ! \noteone}
 \key{agenda for date at cursor}{C-c C-o}
 
 {\bf Commands available in an agenda buffer}
 
 {\bf View Org file}
 
 \key{show original location of item}{SPC/mouse-3}
 %\key{... also available with}{mouse-3}
 \key{show and recenter window}{L}
 \key{goto original location in other window}{TAB/mouse-2}
 %\key{... also available with}{mouse-2}
 \key{goto original location, delete other windows}{RET}
 \key{show subtree in indirect buffer, ded.\ frame}{C-c C-x b}
 \key{toggle follow-mode}{F}
 
 {\bf Change display}
 
 \key{delete other windows}{o}
 \key{view mode dispatcher}{v}
 \key{switch to day/week/month/year/def view}{d w vm vy vSP}
 \key{toggle diary entries / time grid / habits}{D / G / K}
 \key{toggle entry text / clock report}{E / R}
 \key{toggle display of logbook entries}{l / v l/L/c}
 \key{toggle inclusion of archived trees/files}{v a/A}
 \key{refresh agenda buffer with any changes}{r / g}
 \key{filter with respect to a tag}{/}
 \key{save all org-mode buffers}{s}
 \key{display next/previous day,week,...}{f / b}
 \key{goto today / some date (prompt)}{. / j}
 
 {\bf Remote editing}
 
 \key{digit argument}{0-9}
 \key{change state of current TODO item}{t}
 \key{kill item and source}{C-k}
 \key{archive default}{\$ / a}
 \key{refile the subtree}{C-c C-w}
 \key{set/show tags of current headline}{: / T}
 \key{set effort property (prefix=nth)}{e}
 \key{set / compute priority of current item}{, / P}
 \key{raise/lower priority of current item}{S-UP/DOWN\notetwo}
 \key{run an attachment command}{C-c C-a}
 \key{schedule/set deadline for this item}{C-c C-s/d}
 \metax{change timestamp one day earlier/later}{S-LEFT/RIGHT\notetwo}
 \key{change timestamp to today}{>}
 \key{insert new entry into diary}{i}
 \newcolumn
 \key{start/stop/cancel the clock on current item}{I / O / X}
 \key{jump to running clock entry}{J}
 \key{mark / unmark / execute bulk action}{m / u / B}
 
 {\bf Misc}
 
 \key{follow one or offer all links in current entry}{C-c C-o}
 
 {\bf Calendar commands}
 
 \key{find agenda cursor date in calendar}{c}
 \key{compute agenda for calendar cursor date}{c}
 \key{show phases of the moon}{M}
 \key{show sunrise/sunset times}{S}
 \key{show holidays}{H}
 \key{convert date to other calendars}{C}
 
 {\bf Quit and Exit}
 
 \key{quit agenda, remove agenda buffer}{q}
 \key{exit agenda, remove all agenda buffers}{x}
 
 \section{LaTeX and cdlatex-mode}
 
 \key{preview LaTeX fragment}{C-c C-x C-l}
 \key{expand abbreviation (cdlatex-mode)}{TAB}
 \key{insert/modify math symbol (cdlatex-mode)}{` / '}
 \key{insert citation using RefTeX}{C-c C-x [}
 
 \section{Exporting and Publishing}
 
 Exporting creates files with extensions {\it .txt\/} and {\it .html\/}
 in the current directory.  Publishing puts the resulting file into
 some other place.
 
 \key{export/publish dispatcher}{C-c C-e}
 
 \key{toggle asynchronous export}{C-c C-e C-a}
 \key{toggle body/visible only export}{C-c C-e C-b/v}
 \key{toggle subtree export}{C-c C-e C-s}
 \key{insert template of export options}{C-c C-e \#}
 
 \key{toggle fixed width for entry or region}{C-c :}
 \key{toggle pretty display of scripts, entities}{C-c C-x {\tt\char`\\}}
 
 Lines starting with \kbd{\#} and subtrees starting with COMMENT are
 never exported.
 
 \key{toggle COMMENT keyword on entry}{C-c ;}
 
 \section{Dynamic Blocks}
 
 \key{update dynamic block at point}{C-c C-x C-u}
 \metax{update all dynamic blocks}{C-u C-c C-x C-u}
 
 \section{Notes}
 [1] This is only a suggestion for a binding of this command.  Choose
 your own key as shown under ACTIVATION.
 
 [2] Keybinding affected by {\tt org-support-shift-select} and also
  {\tt org-replace-disputed-keys}.
 
 \copyrightnotice
 
 \bye
 
 % Local variables:
 % compile-command: "pdftex orgcard"
 % End: